lady death

 lady death - the model is made in zbrush and has 2 formats stl  . there are two models in the archive . the first model is collapsible . everything is separated for easy printing and painting . and the second model is unified and is not separated by a single whole object . ATTENTION-hands and feet are separated in the stl archive

added a photo from a buyer from France . according to him, " I'm not an expert on actual printing, but this is the PLA. 29CM version. The model has not yet been sanded or has not passed any post-processing, I removed the supports. I had 2 power outages and my heating plate didn't restart for temperature, so there was a shift in the knee. What bad luck! But it still looks good in the end.

"

I would be very grateful if you would share where you are using my 3D model, Also, if you are satisfied with the purchase, please do not forget to rate and

leave me a decent review.

If you want to use a 3D model for 3D printing, please check the model and if it needs any settings, you can contact me.

please leave a message here or in any of my profiles below:https://www.artstation.com/jenyk7 , https://www.facebook.com/evgeny.artifex . Thank you again for downloading my work . my page https://www.patreon.com/artifex3d - The best files for 3D printing in the world. Stl models divided into parts to facilitate 3D printing. All kinds of characters, decoration, cosplay, prosthetics, pieces. Quality in 3D printing. Affordable 3D models. Low cost. Collective purchases of 3D files.
 lady death - the model is made in zbrush and has 2 formats stl  . there are two models in the archive . the first model is collapsible . everything is separated for easy printing and painting . and the second model is unified and is not separated by a single whole object . ATTENTION-hands and feet are separated in the stl archive

added a photo from a buyer from France . according to him, " I'm not an expert on actual printing, but this is the PLA. 29CM version. The model has not yet been sanded or has not passed any post-processing, I removed the supports. I had 2 power outages and my heating plate didn't restart for temperature, so there was a shift in the knee. What bad luck! But it still looks good in the end.

"

I would be very grateful if you would share where you are using my 3D model, Also, if you are satisfied with the purchase, please do not forget to rate and

leave me a decent review.

If you want to use a 3D model for 3D printing, please check the model and if it needs any settings, you can contact me.

please leave a message here or in any of my profiles below:https://www.artstation.com/jenyk7 , https://www.facebook.com/evgeny.artifex . Thank you again for downloading my work . my page https://www.patreon.com/artifex3d - The best files for 3D printing in the world. Stl models divided into parts to facilitate 3D printing. All kinds of characters, decoration, cosplay, prosthetics, pieces. Quality in 3D printing. Affordable 3D models. Low cost. Collective purchases of 3D files.
 lady death - the model is made in zbrush and has 2 formats stl  . there are two models in the archive . the first model is collapsible . everything is separated for easy printing and painting . and the second model is unified and is not separated by a single whole object . ATTENTION-hands and feet are separated in the stl archive

added a photo from a buyer from France . according to him, " I'm not an expert on actual printing, but this is the PLA. 29CM version. The model has not yet been sanded or has not passed any post-processing, I removed the supports. I had 2 power outages and my heating plate didn't restart for temperature, so there was a shift in the knee. What bad luck! But it still looks good in the end.

"

I would be very grateful if you would share where you are using my 3D model, Also, if you are satisfied with the purchase, please do not forget to rate and

leave me a decent review.

If you want to use a 3D model for 3D printing, please check the model and if it needs any settings, you can contact me.

please leave a message here or in any of my profiles below:https://www.artstation.com/jenyk7 , https://www.facebook.com/evgeny.artifex . Thank you again for downloading my work . my page https://www.patreon.com/artifex3d - The best files for 3D printing in the world. Stl models divided into parts to facilitate 3D printing. All kinds of characters, decoration, cosplay, prosthetics, pieces. Quality in 3D printing. Affordable 3D models. Low cost. Collective purchases of 3D files.
 lady death - the model is made in zbrush and has 2 formats stl  . there are two models in the archive . the first model is collapsible . everything is separated for easy printing and painting . and the second model is unified and is not separated by a single whole object . ATTENTION-hands and feet are separated in the stl archive

added a photo from a buyer from France . according to him, " I'm not an expert on actual printing, but this is the PLA. 29CM version. The model has not yet been sanded or has not passed any post-processing, I removed the supports. I had 2 power outages and my heating plate didn't restart for temperature, so there was a shift in the knee. What bad luck! But it still looks good in the end.

"

I would be very grateful if you would share where you are using my 3D model, Also, if you are satisfied with the purchase, please do not forget to rate and

leave me a decent review.

If you want to use a 3D model for 3D printing, please check the model and if it needs any settings, you can contact me.

please leave a message here or in any of my profiles below:https://www.artstation.com/jenyk7 , https://www.facebook.com/evgeny.artifex . Thank you again for downloading my work . my page https://www.patreon.com/artifex3d - The best files for 3D printing in the world. Stl models divided into parts to facilitate 3D printing. All kinds of characters, decoration, cosplay, prosthetics, pieces. Quality in 3D printing. Affordable 3D models. Low cost. Collective purchases of 3D files.
 lady death - the model is made in zbrush and has 2 formats stl  . there are two models in the archive . the first model is collapsible . everything is separated for easy printing and painting . and the second model is unified and is not separated by a single whole object . ATTENTION-hands and feet are separated in the stl archive

added a photo from a buyer from France . according to him, " I'm not an expert on actual printing, but this is the PLA. 29CM version. The model has not yet been sanded or has not passed any post-processing, I removed the supports. I had 2 power outages and my heating plate didn't restart for temperature, so there was a shift in the knee. What bad luck! But it still looks good in the end.

"

I would be very grateful if you would share where you are using my 3D model, Also, if you are satisfied with the purchase, please do not forget to rate and

leave me a decent review.

If you want to use a 3D model for 3D printing, please check the model and if it needs any settings, you can contact me.

please leave a message here or in any of my profiles below:https://www.artstation.com/jenyk7 , https://www.facebook.com/evgeny.artifex . Thank you again for downloading my work . my page https://www.patreon.com/artifex3d - The best files for 3D printing in the world. Stl models divided into parts to facilitate 3D printing. All kinds of characters, decoration, cosplay, prosthetics, pieces. Quality in 3D printing. Affordable 3D models. Low cost. Collective purchases of 3D files.
 lady death - the model is made in zbrush and has 2 formats stl  . there are two models in the archive . the first model is collapsible . everything is separated for easy printing and painting . and the second model is unified and is not separated by a single whole object . ATTENTION-hands and feet are separated in the stl archive

added a photo from a buyer from France . according to him, " I'm not an expert on actual printing, but this is the PLA. 29CM version. The model has not yet been sanded or has not passed any post-processing, I removed the supports. I had 2 power outages and my heating plate didn't restart for temperature, so there was a shift in the knee. What bad luck! But it still looks good in the end.

"

I would be very grateful if you would share where you are using my 3D model, Also, if you are satisfied with the purchase, please do not forget to rate and

leave me a decent review.

If you want to use a 3D model for 3D printing, please check the model and if it needs any settings, you can contact me.

please leave a message here or in any of my profiles below:https://www.artstation.com/jenyk7 , https://www.facebook.com/evgeny.artifex . Thank you again for downloading my work . my page https://www.patreon.com/artifex3d - The best files for 3D printing in the world. Stl models divided into parts to facilitate 3D printing. All kinds of characters, decoration, cosplay, prosthetics, pieces. Quality in 3D printing. Affordable 3D models. Low cost. Collective purchases of 3D files.
 lady death - the model is made in zbrush and has 2 formats stl  . there are two models in the archive . the first model is collapsible . everything is separated for easy printing and painting . and the second model is unified and is not separated by a single whole object . ATTENTION-hands and feet are separated in the stl archive

added a photo from a buyer from France . according to him, " I'm not an expert on actual printing, but this is the PLA. 29CM version. The model has not yet been sanded or has not passed any post-processing, I removed the supports. I had 2 power outages and my heating plate didn't restart for temperature, so there was a shift in the knee. What bad luck! But it still looks good in the end.

"

I would be very grateful if you would share where you are using my 3D model, Also, if you are satisfied with the purchase, please do not forget to rate and

leave me a decent review.

If you want to use a 3D model for 3D printing, please check the model and if it needs any settings, you can contact me.

please leave a message here or in any of my profiles below:https://www.artstation.com/jenyk7 , https://www.facebook.com/evgeny.artifex . Thank you again for downloading my work . my page https://www.patreon.com/artifex3d - The best files for 3D printing in the world. Stl models divided into parts to facilitate 3D printing. All kinds of characters, decoration, cosplay, prosthetics, pieces. Quality in 3D printing. Affordable 3D models. Low cost. Collective purchases of 3D files.

Marketplace


Profile img

Евгений

3 Projects on the website

the model is made in zbrush and has 2 formats stl . there are two models in the archive . the first model is collapsible . everything is separated for easy printing and painting . and the second model is unified and is not separated by a single whole object . ATTENTION-hands and feet are separated in the stl archive

added a photo from a buyer from France . according to him, " I'm not an expert on actual printing, but this is the PLA. 29CM version. The model has not yet been sanded or has not passed any post-processing, I removed the supports. I had 2 power outages and my heating plate didn't restart for temperature, so there was a shift in the knee. What bad luck! But it still looks good in the end.

"

I would be very grateful if you would share where you are using my 3D model, Also, if you are satisfied with the purchase, please do not forget to rate and

leave me a decent review.

If you want to use a 3D model for 3D printing, please check the model and if it needs any settings, you can contact me.

please leave a message here or in any of my profiles below:https://www.artstation.com/jenyk7 , https://www.facebook.com/evgeny.artifex . Thank you again for downloading my work . my page https://www.patreon.com/artifex3d

Scale 1:87

Value


Report / report fraud

More modeller jobs:

waitress on roller skates , undefined
beautiful teacher , undefined

*Approximate amount, automatically converted based on the processed currency BRL (Brazilian Real). There may be a little more or less variation at the time of payment.

Find 3D models at the best price! If what you are looking for is not available, place a modeling order. With a crowdfunding it's pretty cheap! The best are here. The best files for 3D printing in the world. Stl models divided into parts to facilitate 3D printing. All kinds of characters, decoration, cosplay, prosthetics, pieces. Quality in 3D printing. Affordable 3D models. Low cost. Collective purchases of 3D files.

As described in the terms of commitment, after the delivery and the positive return of the files, it will not be possible to return the value, due to the consumable characteristic.