Self-watering Succulent Planter – seated

Self-watering  Succulent Planter – seated - Its a Self-watering  Succulent Planter  made of two parts : the seated figure and the planter which can be removed from the body without even touching the plant,it also help to clean up your planter

This 3d model were sculpted especially for 3d printing. 

It measures 10,3 tall, 7,4 Width and 13,2 length (cm)  at 100%, and they can be scaled as you wish. 

Enjoy !!!


Recommended Printing Settings:

Filament Material: PLA
Layer Resolution: 0,12 mm
Print Speed: 40 mm/s
Printing Temperature: 205°C
Supports: Tree Support - The best files for 3D printing in the world. Stl models divided into parts to facilitate 3D printing. All kinds of characters, decoration, cosplay, prosthetics, pieces. Quality in 3D printing. Affordable 3D models. Low cost. Collective purchases of 3D files.
Self-watering  Succulent Planter – seated - Its a Self-watering  Succulent Planter  made of two parts : the seated figure and the planter which can be removed from the body without even touching the plant,it also help to clean up your planter

This 3d model were sculpted especially for 3d printing. 

It measures 10,3 tall, 7,4 Width and 13,2 length (cm)  at 100%, and they can be scaled as you wish. 

Enjoy !!!


Recommended Printing Settings:

Filament Material: PLA
Layer Resolution: 0,12 mm
Print Speed: 40 mm/s
Printing Temperature: 205°C
Supports: Tree Support - The best files for 3D printing in the world. Stl models divided into parts to facilitate 3D printing. All kinds of characters, decoration, cosplay, prosthetics, pieces. Quality in 3D printing. Affordable 3D models. Low cost. Collective purchases of 3D files.
Self-watering  Succulent Planter – seated - Its a Self-watering  Succulent Planter  made of two parts : the seated figure and the planter which can be removed from the body without even touching the plant,it also help to clean up your planter

This 3d model were sculpted especially for 3d printing. 

It measures 10,3 tall, 7,4 Width and 13,2 length (cm)  at 100%, and they can be scaled as you wish. 

Enjoy !!!


Recommended Printing Settings:

Filament Material: PLA
Layer Resolution: 0,12 mm
Print Speed: 40 mm/s
Printing Temperature: 205°C
Supports: Tree Support - The best files for 3D printing in the world. Stl models divided into parts to facilitate 3D printing. All kinds of characters, decoration, cosplay, prosthetics, pieces. Quality in 3D printing. Affordable 3D models. Low cost. Collective purchases of 3D files.
Self-watering  Succulent Planter – seated - Its a Self-watering  Succulent Planter  made of two parts : the seated figure and the planter which can be removed from the body without even touching the plant,it also help to clean up your planter

This 3d model were sculpted especially for 3d printing. 

It measures 10,3 tall, 7,4 Width and 13,2 length (cm)  at 100%, and they can be scaled as you wish. 

Enjoy !!!


Recommended Printing Settings:

Filament Material: PLA
Layer Resolution: 0,12 mm
Print Speed: 40 mm/s
Printing Temperature: 205°C
Supports: Tree Support - The best files for 3D printing in the world. Stl models divided into parts to facilitate 3D printing. All kinds of characters, decoration, cosplay, prosthetics, pieces. Quality in 3D printing. Affordable 3D models. Low cost. Collective purchases of 3D files.
Self-watering  Succulent Planter – seated - Its a Self-watering  Succulent Planter  made of two parts : the seated figure and the planter which can be removed from the body without even touching the plant,it also help to clean up your planter

This 3d model were sculpted especially for 3d printing. 

It measures 10,3 tall, 7,4 Width and 13,2 length (cm)  at 100%, and they can be scaled as you wish. 

Enjoy !!!


Recommended Printing Settings:

Filament Material: PLA
Layer Resolution: 0,12 mm
Print Speed: 40 mm/s
Printing Temperature: 205°C
Supports: Tree Support - The best files for 3D printing in the world. Stl models divided into parts to facilitate 3D printing. All kinds of characters, decoration, cosplay, prosthetics, pieces. Quality in 3D printing. Affordable 3D models. Low cost. Collective purchases of 3D files.
Self-watering  Succulent Planter – seated - Its a Self-watering  Succulent Planter  made of two parts : the seated figure and the planter which can be removed from the body without even touching the plant,it also help to clean up your planter

This 3d model were sculpted especially for 3d printing. 

It measures 10,3 tall, 7,4 Width and 13,2 length (cm)  at 100%, and they can be scaled as you wish. 

Enjoy !!!


Recommended Printing Settings:

Filament Material: PLA
Layer Resolution: 0,12 mm
Print Speed: 40 mm/s
Printing Temperature: 205°C
Supports: Tree Support - The best files for 3D printing in the world. Stl models divided into parts to facilitate 3D printing. All kinds of characters, decoration, cosplay, prosthetics, pieces. Quality in 3D printing. Affordable 3D models. Low cost. Collective purchases of 3D files.
Self-watering  Succulent Planter – seated - Its a Self-watering  Succulent Planter  made of two parts : the seated figure and the planter which can be removed from the body without even touching the plant,it also help to clean up your planter

This 3d model were sculpted especially for 3d printing. 

It measures 10,3 tall, 7,4 Width and 13,2 length (cm)  at 100%, and they can be scaled as you wish. 

Enjoy !!!


Recommended Printing Settings:

Filament Material: PLA
Layer Resolution: 0,12 mm
Print Speed: 40 mm/s
Printing Temperature: 205°C
Supports: Tree Support - The best files for 3D printing in the world. Stl models divided into parts to facilitate 3D printing. All kinds of characters, decoration, cosplay, prosthetics, pieces. Quality in 3D printing. Affordable 3D models. Low cost. Collective purchases of 3D files.

Marketplace


Profile img

FUTURART3D

6 Projects on the website

Its a Self-watering Succulent Planter made of two parts : the seated figure and the planter which can be removed from the body without even touching the plant,it also help to clean up your planter

This 3d model were sculpted especially for 3d printing.

It measures 10,3 tall, 7,4 Width and 13,2 length (cm) at 100%, and they can be scaled as you wish.

Enjoy !!!

Recommended Printing Settings:

Filament Material: PLA Layer Resolution: 0,12 mm Print Speed: 40 mm/s Printing Temperature: 205°C Supports: Tree Support

Scale 1:1

Value

tags: VASO,SUCULENTA,PLANTER,Self-watering

Report / report fraud

More modeller jobs:

Seated Shih Tzu , undefined
Skull Wearing Motocross Helmet, undefined
THRACIAN GLADIATOR 1-6 STATUE - INCLUDES 1-10 BUST VERSION 3D print model, undefined
Naja cobra snake coming out Smilodon Saber-toothed Tiger Skull, undefined

*Approximate amount, automatically converted based on the processed currency BRL (Brazilian Real). There may be a little more or less variation at the time of payment.

Find 3D models at the best price! If what you are looking for is not available, place a modeling order. With a crowdfunding it's pretty cheap! The best are here. The best files for 3D printing in the world. Stl models divided into parts to facilitate 3D printing. All kinds of characters, decoration, cosplay, prosthetics, pieces. Quality in 3D printing. Affordable 3D models. Low cost. Collective purchases of 3D files.

As described in the terms of commitment, after the delivery and the positive return of the files, it will not be possible to return the value, due to the consumable characteristic.