Vender modelo
Hacer pedido
Theme switch
Inicio
Suscripción

HELLBOY HAND - Height 150 mm

HELLBOY HAND - Height 150 mm - This file is part of my Patreon welcome pack. To get this file at 100% off, support my Patreon. https://www.patreon.com/CloviSilva. The 3D model is prepared and ready for 3D printing. Printing test performed on Creality LD-006 printer. Contents : Winrar file to unzip. In addition to the STL file, the chitubox file with supports is also included, the same one I used to do the test print. You can use it as a reference to place your brackets if you prefer. Total de Pieces: 3 Approximate Height: 150mm Tip for a good impression: Make sure your printer is calibrated Use the correct timing for your resin/printer After printing, wash the piece and remove the supports by hand or with the aid of pliers, remove carefully Cure your parts Finish your piece with sandpaper Paint your piece and make your collection. Thank you very much. Hope you like it! ;D Thank you for downloading and supporting! Please remember to rate my work ! thanks! - Los mejores archivos para impresión 3D del mundo. Modelos Stl divididos en partes para facilitar la impresión 3D. Todo tipo de personajes, decoración, cosplay, prótesis, piezas. Calidad en impresión 3D. Modelos 3D asequibles. Bajo costo. Compras colectivas de archivos 3D.
HELLBOY HAND - Height 150 mm - This file is part of my Patreon welcome pack. To get this file at 100% off, support my Patreon. https://www.patreon.com/CloviSilva. The 3D model is prepared and ready for 3D printing. Printing test performed on Creality LD-006 printer. Contents : Winrar file to unzip. In addition to the STL file, the chitubox file with supports is also included, the same one I used to do the test print. You can use it as a reference to place your brackets if you prefer. Total de Pieces: 3 Approximate Height: 150mm Tip for a good impression: Make sure your printer is calibrated Use the correct timing for your resin/printer After printing, wash the piece and remove the supports by hand or with the aid of pliers, remove carefully Cure your parts Finish your piece with sandpaper Paint your piece and make your collection. Thank you very much. Hope you like it! ;D Thank you for downloading and supporting! Please remember to rate my work ! thanks! - Los mejores archivos para impresión 3D del mundo. Modelos Stl divididos en partes para facilitar la impresión 3D. Todo tipo de personajes, decoración, cosplay, prótesis, piezas. Calidad en impresión 3D. Modelos 3D asequibles. Bajo costo. Compras colectivas de archivos 3D.
HELLBOY HAND - Height 150 mm - This file is part of my Patreon welcome pack. To get this file at 100% off, support my Patreon. https://www.patreon.com/CloviSilva. The 3D model is prepared and ready for 3D printing. Printing test performed on Creality LD-006 printer. Contents : Winrar file to unzip. In addition to the STL file, the chitubox file with supports is also included, the same one I used to do the test print. You can use it as a reference to place your brackets if you prefer. Total de Pieces: 3 Approximate Height: 150mm Tip for a good impression: Make sure your printer is calibrated Use the correct timing for your resin/printer After printing, wash the piece and remove the supports by hand or with the aid of pliers, remove carefully Cure your parts Finish your piece with sandpaper Paint your piece and make your collection. Thank you very much. Hope you like it! ;D Thank you for downloading and supporting! Please remember to rate my work ! thanks! - Los mejores archivos para impresión 3D del mundo. Modelos Stl divididos en partes para facilitar la impresión 3D. Todo tipo de personajes, decoración, cosplay, prótesis, piezas. Calidad en impresión 3D. Modelos 3D asequibles. Bajo costo. Compras colectivas de archivos 3D.
HELLBOY HAND - Height 150 mm - This file is part of my Patreon welcome pack. To get this file at 100% off, support my Patreon. https://www.patreon.com/CloviSilva. The 3D model is prepared and ready for 3D printing. Printing test performed on Creality LD-006 printer. Contents : Winrar file to unzip. In addition to the STL file, the chitubox file with supports is also included, the same one I used to do the test print. You can use it as a reference to place your brackets if you prefer. Total de Pieces: 3 Approximate Height: 150mm Tip for a good impression: Make sure your printer is calibrated Use the correct timing for your resin/printer After printing, wash the piece and remove the supports by hand or with the aid of pliers, remove carefully Cure your parts Finish your piece with sandpaper Paint your piece and make your collection. Thank you very much. Hope you like it! ;D Thank you for downloading and supporting! Please remember to rate my work ! thanks! - Los mejores archivos para impresión 3D del mundo. Modelos Stl divididos en partes para facilitar la impresión 3D. Todo tipo de personajes, decoración, cosplay, prótesis, piezas. Calidad en impresión 3D. Modelos 3D asequibles. Bajo costo. Compras colectivas de archivos 3D.
HELLBOY HAND - Height 150 mm - This file is part of my Patreon welcome pack. To get this file at 100% off, support my Patreon. https://www.patreon.com/CloviSilva. The 3D model is prepared and ready for 3D printing. Printing test performed on Creality LD-006 printer. Contents : Winrar file to unzip. In addition to the STL file, the chitubox file with supports is also included, the same one I used to do the test print. You can use it as a reference to place your brackets if you prefer. Total de Pieces: 3 Approximate Height: 150mm Tip for a good impression: Make sure your printer is calibrated Use the correct timing for your resin/printer After printing, wash the piece and remove the supports by hand or with the aid of pliers, remove carefully Cure your parts Finish your piece with sandpaper Paint your piece and make your collection. Thank you very much. Hope you like it! ;D Thank you for downloading and supporting! Please remember to rate my work ! thanks! - Los mejores archivos para impresión 3D del mundo. Modelos Stl divididos en partes para facilitar la impresión 3D. Todo tipo de personajes, decoración, cosplay, prótesis, piezas. Calidad en impresión 3D. Modelos 3D asequibles. Bajo costo. Compras colectivas de archivos 3D.
HELLBOY HAND - Height 150 mm - This file is part of my Patreon welcome pack. To get this file at 100% off, support my Patreon. https://www.patreon.com/CloviSilva. The 3D model is prepared and ready for 3D printing. Printing test performed on Creality LD-006 printer. Contents : Winrar file to unzip. In addition to the STL file, the chitubox file with supports is also included, the same one I used to do the test print. You can use it as a reference to place your brackets if you prefer. Total de Pieces: 3 Approximate Height: 150mm Tip for a good impression: Make sure your printer is calibrated Use the correct timing for your resin/printer After printing, wash the piece and remove the supports by hand or with the aid of pliers, remove carefully Cure your parts Finish your piece with sandpaper Paint your piece and make your collection. Thank you very much. Hope you like it! ;D Thank you for downloading and supporting! Please remember to rate my work ! thanks! - Los mejores archivos para impresión 3D del mundo. Modelos Stl divididos en partes para facilitar la impresión 3D. Todo tipo de personajes, decoración, cosplay, prótesis, piezas. Calidad en impresión 3D. Modelos 3D asequibles. Bajo costo. Compras colectivas de archivos 3D.
HELLBOY HAND - Height 150 mm - This file is part of my Patreon welcome pack. To get this file at 100% off, support my Patreon. https://www.patreon.com/CloviSilva. The 3D model is prepared and ready for 3D printing. Printing test performed on Creality LD-006 printer. Contents : Winrar file to unzip. In addition to the STL file, the chitubox file with supports is also included, the same one I used to do the test print. You can use it as a reference to place your brackets if you prefer. Total de Pieces: 3 Approximate Height: 150mm Tip for a good impression: Make sure your printer is calibrated Use the correct timing for your resin/printer After printing, wash the piece and remove the supports by hand or with the aid of pliers, remove carefully Cure your parts Finish your piece with sandpaper Paint your piece and make your collection. Thank you very much. Hope you like it! ;D Thank you for downloading and supporting! Please remember to rate my work ! thanks! - Los mejores archivos para impresión 3D del mundo. Modelos Stl divididos en partes para facilitar la impresión 3D. Todo tipo de personajes, decoración, cosplay, prótesis, piezas. Calidad en impresión 3D. Modelos 3D asequibles. Bajo costo. Compras colectivas de archivos 3D.
HELLBOY HAND - Height 150 mm - This file is part of my Patreon welcome pack. To get this file at 100% off, support my Patreon. https://www.patreon.com/CloviSilva. The 3D model is prepared and ready for 3D printing. Printing test performed on Creality LD-006 printer. Contents : Winrar file to unzip. In addition to the STL file, the chitubox file with supports is also included, the same one I used to do the test print. You can use it as a reference to place your brackets if you prefer. Total de Pieces: 3 Approximate Height: 150mm Tip for a good impression: Make sure your printer is calibrated Use the correct timing for your resin/printer After printing, wash the piece and remove the supports by hand or with the aid of pliers, remove carefully Cure your parts Finish your piece with sandpaper Paint your piece and make your collection. Thank you very much. Hope you like it! ;D Thank you for downloading and supporting! Please remember to rate my work ! thanks! - Los mejores archivos para impresión 3D del mundo. Modelos Stl divididos en partes para facilitar la impresión 3D. Todo tipo de personajes, decoración, cosplay, prótesis, piezas. Calidad en impresión 3D. Modelos 3D asequibles. Bajo costo. Compras colectivas de archivos 3D.
HELLBOY HAND - Height 150 mm - This file is part of my Patreon welcome pack. To get this file at 100% off, support my Patreon. https://www.patreon.com/CloviSilva. The 3D model is prepared and ready for 3D printing. Printing test performed on Creality LD-006 printer. Contents : Winrar file to unzip. In addition to the STL file, the chitubox file with supports is also included, the same one I used to do the test print. You can use it as a reference to place your brackets if you prefer. Total de Pieces: 3 Approximate Height: 150mm Tip for a good impression: Make sure your printer is calibrated Use the correct timing for your resin/printer After printing, wash the piece and remove the supports by hand or with the aid of pliers, remove carefully Cure your parts Finish your piece with sandpaper Paint your piece and make your collection. Thank you very much. Hope you like it! ;D Thank you for downloading and supporting! Please remember to rate my work ! thanks! - Los mejores archivos para impresión 3D del mundo. Modelos Stl divididos en partes para facilitar la impresión 3D. Todo tipo de personajes, decoración, cosplay, prótesis, piezas. Calidad en impresión 3D. Modelos 3D asequibles. Bajo costo. Compras colectivas de archivos 3D.
HELLBOY HAND - Height 150 mm - This file is part of my Patreon welcome pack. To get this file at 100% off, support my Patreon. https://www.patreon.com/CloviSilva. The 3D model is prepared and ready for 3D printing. Printing test performed on Creality LD-006 printer. Contents : Winrar file to unzip. In addition to the STL file, the chitubox file with supports is also included, the same one I used to do the test print. You can use it as a reference to place your brackets if you prefer. Total de Pieces: 3 Approximate Height: 150mm Tip for a good impression: Make sure your printer is calibrated Use the correct timing for your resin/printer After printing, wash the piece and remove the supports by hand or with the aid of pliers, remove carefully Cure your parts Finish your piece with sandpaper Paint your piece and make your collection. Thank you very much. Hope you like it! ;D Thank you for downloading and supporting! Please remember to rate my work ! thanks! - Los mejores archivos para impresión 3D del mundo. Modelos Stl divididos en partes para facilitar la impresión 3D. Todo tipo de personajes, decoración, cosplay, prótesis, piezas. Calidad en impresión 3D. Modelos 3D asequibles. Bajo costo. Compras colectivas de archivos 3D.
HELLBOY HAND - Height 150 mm - This file is part of my Patreon welcome pack. To get this file at 100% off, support my Patreon. https://www.patreon.com/CloviSilva. The 3D model is prepared and ready for 3D printing. Printing test performed on Creality LD-006 printer. Contents : Winrar file to unzip. In addition to the STL file, the chitubox file with supports is also included, the same one I used to do the test print. You can use it as a reference to place your brackets if you prefer. Total de Pieces: 3 Approximate Height: 150mm Tip for a good impression: Make sure your printer is calibrated Use the correct timing for your resin/printer After printing, wash the piece and remove the supports by hand or with the aid of pliers, remove carefully Cure your parts Finish your piece with sandpaper Paint your piece and make your collection. Thank you very much. Hope you like it! ;D Thank you for downloading and supporting! Please remember to rate my work ! thanks! - Los mejores archivos para impresión 3D del mundo. Modelos Stl divididos en partes para facilitar la impresión 3D. Todo tipo de personajes, decoración, cosplay, prótesis, piezas. Calidad en impresión 3D. Modelos 3D asequibles. Bajo costo. Compras colectivas de archivos 3D.
HELLBOY HAND - Height 150 mm - This file is part of my Patreon welcome pack. To get this file at 100% off, support my Patreon. https://www.patreon.com/CloviSilva. The 3D model is prepared and ready for 3D printing. Printing test performed on Creality LD-006 printer. Contents : Winrar file to unzip. In addition to the STL file, the chitubox file with supports is also included, the same one I used to do the test print. You can use it as a reference to place your brackets if you prefer. Total de Pieces: 3 Approximate Height: 150mm Tip for a good impression: Make sure your printer is calibrated Use the correct timing for your resin/printer After printing, wash the piece and remove the supports by hand or with the aid of pliers, remove carefully Cure your parts Finish your piece with sandpaper Paint your piece and make your collection. Thank you very much. Hope you like it! ;D Thank you for downloading and supporting! Please remember to rate my work ! thanks! - Los mejores archivos para impresión 3D del mundo. Modelos Stl divididos en partes para facilitar la impresión 3D. Todo tipo de personajes, decoración, cosplay, prótesis, piezas. Calidad en impresión 3D. Modelos 3D asequibles. Bajo costo. Compras colectivas de archivos 3D.
HELLBOY HAND - Height 150 mm - This file is part of my Patreon welcome pack. To get this file at 100% off, support my Patreon. https://www.patreon.com/CloviSilva. The 3D model is prepared and ready for 3D printing. Printing test performed on Creality LD-006 printer. Contents : Winrar file to unzip. In addition to the STL file, the chitubox file with supports is also included, the same one I used to do the test print. You can use it as a reference to place your brackets if you prefer. Total de Pieces: 3 Approximate Height: 150mm Tip for a good impression: Make sure your printer is calibrated Use the correct timing for your resin/printer After printing, wash the piece and remove the supports by hand or with the aid of pliers, remove carefully Cure your parts Finish your piece with sandpaper Paint your piece and make your collection. Thank you very much. Hope you like it! ;D Thank you for downloading and supporting! Please remember to rate my work ! thanks! - Los mejores archivos para impresión 3D del mundo. Modelos Stl divididos en partes para facilitar la impresión 3D. Todo tipo de personajes, decoración, cosplay, prótesis, piezas. Calidad en impresión 3D. Modelos 3D asequibles. Bajo costo. Compras colectivas de archivos 3D.

Marketplace

Profile img

CLOVIS SILVA

28 Proyectos en el sitio web

This file is part of my Patreon welcome pack. To get this file at 100% off, support my Patreon. https://www.patreon.com/CloviSilva.

The 3D model is prepared and ready for 3D printing. Printing test performed on Creality LD-006 printer. Contents : Winrar file to unzip. In addition to the STL file, the chitubox file with supports is also included, the same one I used to do the test print. You can use it as a reference to place your brackets if you prefer.

Total de Pieces: 3 Approximate Height: 150mm

Tip for a good impression:

Make sure your printer is calibrated Use the correct timing for your resin/printer After printing, wash the piece and remove the supports by hand or with the aid of pliers, remove carefully Cure your parts Finish your piece with sandpaper Paint your piece and make your collection. Thank you very much. Hope you like it! ;D

Thank you for downloading and supporting! Please remember to rate my work ! thanks!

Escala 1:12

(Haga clic aquí y obtenga más información sobre las escalas)
Valor: 

tags: hellboy,bust,hero,3dprinting,toys,marvel,dc,games,miniatures,zbrush,3d,3dmodeling
Informar / denunciar fraude

Más trabajos de modelista:

ORC BUST - Height 190 mm, undefined
KRATOS SWORD CHAOS / WALL PLAQUE 02, undefined
ORC BUS - Height 150 mm , undefined
SONIC, undefined

Ver más

*Monto aproximado, convertido automáticamente en base a la moneda procesada BRL (Real Brasileño). Puede haber un poco más o menos variación en el momento del pago.

¡Encuentra modelos 3D al mejor precio! Si lo que busca no está disponible, haga un pedido de modelado. ¡Con un crowdfunding es bastante barato! Los mejores estan aqui. Los mejores archivos para impresión 3D del mundo. Modelos Stl divididos en partes para facilitar la impresión 3D. Todo tipo de personajes, decoración, cosplay, prótesis, piezas. Calidad en impresión 3D. Modelos 3D asequibles. Bajo costo. Compras colectivas de archivos 3D.

Como se describe en los términos del compromiso, luego de la entrega y la devolución positiva de los archivos, no será posible devolver el valor, debido a la característica consumible.